divine

Wicked Edge PP1 on the way

Re: Wicked Edge PP1 on the way

Postby Yessir » Tue Sep 24, 2013 11:36 pm

well... it works i suppose :lol: . Did a little paper cutting demo vid (which is uploading atm) after I sharpened my little assisted knife this evening. Some of the others I show have been used a fair bit so are certainly not even A1, esp the Muela and it has a steep bevel plus not stropped.

I'm by no means a pro with it now even, I only use it when I get the chance/can be arsed so I haven't got a lot of hours on it either. I think it will do the job well anyway, I have used it enough to know that. I like the way you just get the book out an see the settings for each knife so it can be put back in the clamp in exactly the same place each time to. There is a section of the booklet marked out for you to fill in with the details. I couldn't imagine how crap it would be not knowing as you'd end up taking far longer and removing metal that didn't need removing each time so that's nice.

Only criticism is the fattening of the bevel as you reach out to the point on longer knives and heavy dropping points. I like to see it even/consistent all the way ideally.... That's why I like doing tanto's because I do it in two separate angles (increase the angle for the tip). Again everything is written down so its a quick easy job setting up the knives.

The strops need much more care not to wreck, esp when working near the point, as the back of the point will slice it all the way.

Otherwise there's nothing to complain about, if something is wrong its usually the operator and that I can deal with :grin: .

A few pics from tonight, it's my cheapest lock knife but it's decent actually, I'm wishing I had not bought so many part serrated knives now though :lol: , mind you they are bringing out a serration sharpener for it anyway :thup: .

Image

Image

Image

Image

Probably only spent a minute with the strops...

Image
User avatar
Yessir
Hunter
Hunter
 
Posts: 1211
Joined: Sun Oct 09, 2011 11:38 am
Location: Isle of Man

Re: Wicked Edge PP1 on the way

Postby Yessir » Wed Sep 25, 2013 9:38 am

User avatar
Yessir
Hunter
Hunter
 
Posts: 1211
Joined: Sun Oct 09, 2011 11:38 am
Location: Isle of Man

Re: Wicked Edge PP1 on the way

Postby leadpig » Thu Sep 26, 2013 8:26 am

sharp then :thup: :thup:
Sidebyside wrote:Leadpig is probably right,( though I hate to admit that :mad: ;) ) .


Fenrir wrote:It is often better to let people think you are a bit simple rather than removing all doubt.
User avatar
leadpig
Consul Master Hunter
Consul Master Hunter
Moderator
Moderator
Site Supporter
Site Supporter
 
Posts: 11232
Joined: Wed Dec 17, 2008 9:33 pm
Location: Isle of Man

Re: Wicked Edge PP1 on the way

Postby leadpig » Mon Jan 13, 2014 6:19 pm

any more info :thup:
Sidebyside wrote:Leadpig is probably right,( though I hate to admit that :mad: ;) ) .


Fenrir wrote:It is often better to let people think you are a bit simple rather than removing all doubt.
User avatar
leadpig
Consul Master Hunter
Consul Master Hunter
Moderator
Moderator
Site Supporter
Site Supporter
 
Posts: 11232
Joined: Wed Dec 17, 2008 9:33 pm
Location: Isle of Man

Re: Wicked Edge PP1 on the way

Postby Yessir » Mon Jan 13, 2014 7:21 pm

leadpig wrote:any more info :thup:


Are you geting ready to buy one yet then? :)
User avatar
Yessir
Hunter
Hunter
 
Posts: 1211
Joined: Sun Oct 09, 2011 11:38 am
Location: Isle of Man

Re: Wicked Edge PP1 on the way

Postby leadpig » Mon Jan 13, 2014 7:38 pm

maybe one day,but steve 24/7 sniper is :)
Sidebyside wrote:Leadpig is probably right,( though I hate to admit that :mad: ;) ) .


Fenrir wrote:It is often better to let people think you are a bit simple rather than removing all doubt.
User avatar
leadpig
Consul Master Hunter
Consul Master Hunter
Moderator
Moderator
Site Supporter
Site Supporter
 
Posts: 11232
Joined: Wed Dec 17, 2008 9:33 pm
Location: Isle of Man

Re: Wicked Edge PP1 on the way

Postby 247sniper » Tue Aug 12, 2014 8:32 pm

One on the way ;) should be here tomorrow :grin:
User avatar
247sniper
Moderator
Moderator
Site Supporter
Site Supporter
 
Posts: 4299
Joined: Tue Apr 13, 2010 10:39 pm
Location: Isle Of Man

Re: Wicked Edge PP1 on the way

Postby leadpig » Fri Aug 15, 2014 8:46 pm

247sniper wrote:One on the way ;) should be here tomorrow :grin:

well
after my overtime binge i can see me getting one soon :)
Sidebyside wrote:Leadpig is probably right,( though I hate to admit that :mad: ;) ) .


Fenrir wrote:It is often better to let people think you are a bit simple rather than removing all doubt.
User avatar
leadpig
Consul Master Hunter
Consul Master Hunter
Moderator
Moderator
Site Supporter
Site Supporter
 
Posts: 11232
Joined: Wed Dec 17, 2008 9:33 pm
Location: Isle of Man

Re: Wicked Edge PP1 on the way

Postby 247sniper » Sat Aug 16, 2014 12:38 am

leadpig wrote:
247sniper wrote:One on the way ;) should be here tomorrow :grin:

well
after my overtime binge i can see me getting one soon :)



You will after you have had a go off mine, there is nothing that will compare dude ! :)
User avatar
247sniper
Moderator
Moderator
Site Supporter
Site Supporter
 
Posts: 4299
Joined: Tue Apr 13, 2010 10:39 pm
Location: Isle Of Man

Re: Wicked Edge PP1 on the way

Postby flintlok » Tue Jun 25, 2019 3:31 pm

Commie gone, long time no come see. :shotgun: :shotgun: :shotgun: :shotgun: :shotgun: :shotgun: :grin: :grin: :grin: :grin: :grin: :grin:
The faster I go, the older I get.

"I am with you Flintsy ." SidebySide

Flintlok, I think you're dead right....."The Dogge"

" when an American comes on the forum .....and then gets a bit upperty ..."

token yank
User avatar
flintlok
Consul Master Hunter
Consul Master Hunter
Moderator
Moderator
Site Supporter
Site Supporter
 
Posts: 14698
Joined: Wed Feb 11, 2009 4:34 am
Location: Tiverton, RI, USA

Previous

Return to Knives, axes, other cutting tools and sharpening

Who is online

Users browsing this forum: No registered users and 4 guests