divine

western arms

Anything air rifle related

western arms

Postby gazzar15 » Fri Mar 15, 2013 11:01 pm

I have a western arms STI infinity and it would appear that the seal on the mag has failed as it doesn't apppear to hold gas. Does anybody know where I can get it sorted?
Thanks
gazzar15
Musketeer
Musketeer
 
Posts: 54
Joined: Wed Apr 30, 2008 10:14 pm
Location: West Lancs

Re: western arms

Postby Tony.T » Sun Mar 24, 2013 3:40 pm

Parts for western arms GBB pistols are no longer available. The only guy selling them was Mike Cripps of Elite shooting centre, but he no longer does them as I believe WA are no more, sadly.

However- you may not need to replace anything. Leaking mags are common across all makes. Strip it all down, including the valves, remove the seals and clean them with Silicone oil. Then reassemble using a thin coat of silicone grease on the seals.

Provided the seals were not split or physically damaged in any way you should be ok until it needs doing again!

If that doesn't work I think I have a spare WA mag that I can sell you- it may not be the right one for your pistol, but it was for a short barrelled infinity so the internals should be the same.
Tony.T
Rifleman
Rifleman
 
Posts: 124
Joined: Wed Jul 16, 2008 1:02 pm

Re: western arms

Postby gazzar15 » Sun Mar 24, 2013 11:56 pm

Thanks for that Tony I will have a do and report back
gazzar15
Musketeer
Musketeer
 
Posts: 54
Joined: Wed Apr 30, 2008 10:14 pm
Location: West Lancs


Return to Airguns and FAC air

Who is online

Users browsing this forum: No registered users and 24 guests