divine

Is my annealing gone wrong

Ammunition reloading for centerfire or shotgun
Forum rules
Shooters using reloading info and load data in this forum do so at their own risk. Check all loads with printed, commercially available reloading manuals and NEVER exceed maximum powder weights. The board/forum accepts NO liability for accidents! Be careful!

Is my annealing gone wrong

Postby Artemistrad » Sat Oct 13, 2018 11:41 am

3522D0E7-6879-465F-AE6D-6D9EC87D645C.jpeg
E185C74F-3F83-4DA9-9D72-AA1824724AC6.jpeg
hi. I made a annealer with a pencil torch. I have the feeling the annealing went totally wrong only till the half of the shoulder is a colour change. Who can help me and tell me if they are ok or not. See picture. If it is done wrong; can I do it again now before these cases have been fired?
Artemistrad
Newbie
Newbie
 
Posts: 1
Joined: Sat Oct 13, 2018 11:35 am

Re: Is my annealing gone wrong

Postby Fat Albert » Wed Jun 03, 2020 6:23 am

You can redue them. The bottom of the blue band that is in the middle of the shoulder should be about 1/2" below the shoulder.
Fat Albert
Newbie
Newbie
 
Posts: 3
Joined: Mon Jul 27, 2015 2:02 am


Return to Reloading

Who is online

Users browsing this forum: No registered users and 17 guests