The_Dogge wrote:I will, I will! but I'll wait until the range is empty so nobody else is potentially endangered. I'm sure it will be fine, but even in the barrel they fit down easily it took me about 40 mins to scrub out the plastic fouling from 3 shots! In a tight barrel i might have to put the brush in a drill, is that a good idea?
Drill brushing the bore of a shotgun , if you have you ask, then it's probably not a good idea. Typically shot gun bores are highly polished and polish further with subsequent firing and cleaning cycles. Also the Benelli typically has a chromed bore or at least my slug gun does. Should you get aggressive with drill brushing the bore you may create a rough spot where fouling will accumulate.