divine

Lee LoadMaster bullet feeder

Ammunition reloading for centerfire or shotgun
Forum rules
Shooters using reloading info and load data in this forum do so at their own risk. Check all loads with printed, commercially available reloading manuals and NEVER exceed maximum powder weights. The board/forum accepts NO liability for accidents! Be careful!

Lee LoadMaster bullet feeder

Postby Beer Hunter » Sun Oct 17, 2010 8:05 pm

Guys,

Does anyone have a Lee LoadMaster and bullet feeder. If so, does the bullet feeder fit on station 5?

I want to use:
Station 1 - decapper
Station 2 - size and prime
Station 3 - powder through die
Station 4 - RCBS lock out die
Station 5 - Bullet feed, seating and crimp

Kev.
Beer Hunter
 

Re: Lee LoadMaster bullet feeder

Postby jeff » Mon Oct 18, 2010 12:28 am

If it's an option, I'd use a case feeder rather than a bullet feeder - playing on a mates Dillon 650 compared to my own 550 (Which has neither) I found not manually placing the case saves far more time, and on a Dillon still allows you to do a manual check the powder has been thrown when you place the bullet. The Lee may be different - I've never seen one.
Jeff

Life's too short to hunt with an ugly gun.
User avatar
jeff
Consul Master Hunter
Consul Master Hunter
Moderator
Moderator
Site Supporter
Site Supporter
 
Posts: 5459
Joined: Fri Apr 18, 2008 5:18 am
Location: Perth (The sunny one)

Re: Lee LoadMaster bullet feeder

Postby Beer Hunter » Mon Oct 18, 2010 7:51 am

Jeff,

It has a case feeder on station one.
Image

Kev.
Beer Hunter
 

Re: Lee LoadMaster bullet feeder

Postby jeff » Mon Oct 18, 2010 11:22 am

Beer Hunter wrote:Jeff,

It has a case feeder on station one.

Kev.


Excellent - confirms my point, but helps you not in the slightest! :grin:

I'm seriously toying with getting a 650 just for the case feeder, and then using the 550 for the 9mm which I shoot less often or even rifle rounds like my 7mm where I'm less anal on case prep or charge weight.
Jeff

Life's too short to hunt with an ugly gun.
User avatar
jeff
Consul Master Hunter
Consul Master Hunter
Moderator
Moderator
Site Supporter
Site Supporter
 
Posts: 5459
Joined: Fri Apr 18, 2008 5:18 am
Location: Perth (The sunny one)

Re: Lee LoadMaster bullet feeder

Postby Beer Hunter » Mon Oct 18, 2010 9:01 pm

Mailed Lee and got the response:
The bullet Feeder has to be located at station 4 for mounting reasons.

Tech Service


That is the end of that idea if I want a powder check :(

Kev.
Beer Hunter
 


Return to Reloading

Who is online

Users browsing this forum: No registered users and 13 guests

cron